Thursday, September 29, 2016

flight = epic fail..

Hey guys. ya know how I was going to make a video yesterday? I flew the drone right after the blog because it would get dark soon, and turns out, it starts drifting towards the creek. At the beginning I had the counterweight, but it was so heavy the quadcopter no longer had lift. I took it off, and it went forward and up to be right over the creek. Right then it lost control, because between me and the creek was a tree. Not tall, but really solid. The camera could see fine, but the controller lost control, and it stopped flying. It went straight down,and I freaked out.....



Right then I lost video, and I was like, SHOOOT

I don't cussss...

Anyways I run to the creek, AND THE QUAD LIGHTS ARE STILL ONNNNN!!!!!!

I think maybe the quadcopter is waterproof, and not the camera.

I take off my shoes and socks, scare the tadpoles away, and get the quad. when I take it out of the water it gets reception and starts spinning the propellers. I WAS SO RELIEVED. The camera still didn't work for a long time, and I took it all up. I got my hot glue gun, had to glue the camera back on because it fell out, tried to blow out all the mud and water, failed and had dinner. I went back and it had mostly dried. The camera worked again, but I couldn't find the channel. After a few minutes I got it back, and tried flying in my upper backyard.

Why didn't I fly there originally? I have a tendency when I'm in trouble to turn everything off, but with concrete up there, I can't really do that...



What's worse, I don't get the footage. When it hit the water the sd card got shorted out, and everything got corrupted. Later it got some footage from trying to turn it on down there, but the only actually not 0.1 second footage was me powering it up, and then  6 seconds later it ends.




What's the new plan? I'm going use the original frame. Why didn't I do this earlier? With the old frame, it was around 95mm . with the new frame it is 105mm

But the balance.....

So I'm going to use the old camera and just glue the camera on top of it.



I realize something. Maybe I should have done a basic check flight really close first before I went really high....


wall das all fo today,, if ya liked it be sure to subscribe, and share, and love your friends. also watch your prrofanity if you're one of those cussing peoples. I don't like people that cusss.... sorry. You can't be fam. JK just stahp soon or else I WILL GO TO YOUR HOME AND GRAB YOUR NECK AND PROCEED TO TELL YOU TO WATCH YOUR ##$@ING PROFANITY!!!!!

profanity is cussing, if you're a little person or don't understand the bad joke above.


Wallllkjlkjlkjlkjl gaud that was a long and beautiful blog. I will forever come back and look at this.....


K steven if you see this in the future

I LOST THE GAME

 anyways if You/ I mean future me, see this in the future check out your own channel for your old self....


ONE REASON TO DO YOUTUBE:

WHEN YOURE AN OLD MAN ABOUT TO DIE YOU CAN GET A  LAPTOP AND WATCH YOUR OWN CRINGEY VIDEOS, CRINGE, THEN DIE


gadu this is way too long... bye


STELKF Jsldkf jljsdl;ij;sdgljsdf l; ;sdf sdf jl;sd;l;op;o;o';p;sssdsdf l;sdf l;sdf kl;sdf l;ik jdf

Wednesday, September 28, 2016

ordered wrong kind of filament...

Hey guys. I ordered the wrong filament fo my printer... I'm supposed to use PLA because it w won't bend when I don't put glue on my print bed,but I ordered ABS which smells worse and tends to bend it's corners off the build plate. I'm print a quick robot right now,and turns out it's ok... but wait till I get a big print...

Update on the plane glider wing quadcopter thing. The quad arrived.
! Yesterday I took it apart,desoldered the motors,and planted it int my frame with the camera. Expect a vid later today... I flew it once, but it's so front heavy that it's always going forward too fast. I put a weight in the back,so hopefully it'll be alright.

if you wanted to see the wing I decided not on, here it is:

It's pretty small. Let me get a pic of the quadcopter:

Don't ask why the second picture it's tinted.... sd card for size reference.. the camera you see in it is for FPV .the recording one came with the Hubsan x4, which is what I bought type make this..

Wall das all fo today our y like d it sub, and expect the video layer today, and uhh yeah, see y'all in dem next one!

Sunrise aybe surge Steve sleeve leve LEVER lure stra lens lens leve LEVE

Monday, September 26, 2016

nevermind da wing..

Hey guys I'm back...

Ya know that wing I was building? I kinda just found out how much the electronics would cost,wanna know how much?around 80 bucks. Yup. I had a new plan. By the way the wing was called the FT Arrow ig you wanna build it.

Will the new plan is, I'm gonna build a glider! Why? All i would need to buy its the foam to build the frame,a flight controller, I already have batteries,and I wouldn't need a motor or propeller!

The total cost would be only be around 53 bucks. I have an old Champ RTF that doesn't work, but I have the frame and the motor and propeller, so I could sell those on eBay and provably get enough money for it. Why am I building this? I have an older brother,and he spends his life on his computer. I sorta so that, BUT HE'S ON HIS SENIOR YEAR!!!

the goal of this is to get him into the hobby,and have him spend some time flying planes or something.




Wall if you like dis blog and fond it to be boootiful be sure to share,.... yes, gimme da views.  But anyways das it fo today,and see y'all in dem next one!


Stylus ck fl c.f. xmdk m dkddsg s kdkdbdn zzz ks

Sunday, September 25, 2016

Two wings... on a wing.. (BTW Dis is post 107)

Hey guys. if you don't believe it, I'm kinda busy right now in the year. I'm trying out for drum major this year at school, trying for honor bands in the area, but most importantly, I'm building a wing! a wing, like a delta wing. a RC model.(remote control)  I'm making this one:
Image result for FT mini arrow

This is a model by Josh Bixler, part of Flite Test, which I kinda got really addicted to... ya. but check it out. I finished one side of it so far, too lazy to add a picture cause that would take a while, and my desk is also a mess right now. so yah, das it for ......

So yeah, das it fo today, see y'all in them next one!


Stevevvelevel;d

Wait, wut? 90 bucks on electronics? (Still workin on dat)

Thursday, September 22, 2016

Fly with Donald Trump...

Hi guys I'm back after a long time. I'm dead. lovely.

K first a life update. Recently, Instead of blogging and making videos, I've been watching videos too much. I'm really getting into the quadcopter stuff, and it's so awesome. I STILL HAVEN"T GOTTEN THE QUAD YET. I'm still waiting. But in the meantime I've been watching all the Quadcopter channels. Just look up "FPV Quadcopter" on youtube. Or look up Rotor Riot *copyright sign right here*

They are da best.

Anyways the title. I was watching a vid (duh) and this ad popped up:

Trump. Just beautiful. lovely. Ya know what? I clicked on it. Here is where is goes










get pranked.....



Holy dat's a long URL... yah, great let's go through it:
It pretty much says donate at least 3 dollars for a chance to fly with Trump, and take a picture with him. You probably gotta pay at least $1,000 to actually get a good chance though....

Wow great. and plus there's a bunch of legal stuff I'm too lazy to read, so screw dat...yah, bye peeps, next blog


aug gaud, that's stupid. Moral of today. Give trump your money...


Woowwww. whatever. Imma end dis right here, so bye...


Stevelvellevlelvlelvel


slkfjstldkf jsdlkjf;afj;sdkjf;sdl
sdflkj
sdlkdf
sdf'sdf
sdf
sdf
sdf
sf
sdfwasd
wasdw
asdwa
sdw
asd
awsda
sd
awsd
as
d

Tuesday, September 20, 2016

gone da whole day. bye

Hi guys quick notice cause I'm still alive,and also today imma be gone the entire day.yesterday my mom said we going somewhere special,  and now we are.but turns out 2 hours on the road. Then the thing.then2 hours back. we're getting back at9.

YaY....,

Plez expect a vid soon. So das it

Das it again so see y'all in dem next one...


Custody Tauber Steve SUBTITLED SURRENDER LEVE LEAVE

Leve....

Sorry it's all terrible grammar wise gotta go fast....

Saturday, September 17, 2016

There is no pattern, there is no growth.

Hey guys, I'n bored... yeah. Today I'm gonna play trombone, get some stuff, and hope the quad arrives. I'm playing bassoon also in band this year. Bassoon is called fagott and fagotto in some places....

Anyways the title. I was looking at pageviews, and nothing is happening. It goes up big, then goes to 0, then the next three days it's in the middle.... I crei evre tim  much cri, yes.

Also, I came up with a theory. Ya know how some of you are in Germany or something? Well I thought up that some of this could be fake, and you have a software, or browse through a special browser that lets you fake being in Germany. Maybe not, if you are in Germany or something like dat tell me. I wanna know... can you show me... I wanna know if these strangers like me.... don't get it....... wutevr.

Wow, great blog, me. Gaud the ugly video of the gopro is out, expect a "how crappy is it actually?" video soon.

Sooooooohohohoh yeah.. see y'all in dem next one.. enjoy life, and don't kill yourself... wow, very negative. wasn't this blog supposed to be over? k, BYEEEEEEEE

sTYel jfsdkfhsdkjfslkjtellvelvlelvelvlelvellv

Wednesday, September 14, 2016

Swear I'm working hard.and my bro got a virus.

First,I feel so bad for not posting.

Well today,I spent about an hour plus editing the gopro video.It was 30minutes,now it's 12! I still can't get music, but screw it... to be honest the video ain't all that great, it's just because my editor is so bad it took so long. If you're really curious go ahead, but if not,no point.

Also,my bro's computer,who is 17 got a virus on his computer.He has a newer computer and his is about as spore a mine now. Mine is at 50% when idle. That's how bad it usually iys after the first20 minutes.

Wall i gotta sleep, so das it. See ya...


Supremely cliff dBm once arrive

Monday, September 12, 2016

Almost lost that little @#$%

Hey guys it's a Monday... Well here's a story about yesterday. Yesterday I blogged mobile, and I said I was going somewhere right? We went to the zoo. Don't call me a hobo or anything *gets sent over 9000 hate messages*, but we went there... very repetetive, yes. Well we go look, go to some shows, then after that go to the bathroom and water before leaving. While we're at the bathroom, my little bro finishes early, and runs. We don't know, and when we're done we start leaving. Then we don't know where he is. We look for him. We backtrack, go forward, we ask the people there who work there if they can help. They look, and I have to wait with my other little bro. My sister comes along, and I tell her to tell my mom I went searching. I go, and later, my mom comes, and says, "He ran to the car, and was doing nothing. We got him back."

Wow... I was pissed. who found him? The police peeps on bikes. Apparently, they asked for my mom's phone number, my bro put it in, and they called my mom. When I return, my little brother is sitting right where I was sitting when I was watching my other little brother, and he's angry, urgent and yells, "CAN WE LEAVE NOW!!!" What a stupid, ughhh just, no, just a horrible little, creature....


wall, das all I got fo today,  and uh, yeah, expect a vidweo soon, and das is, soo see y'all in dem next one!!!

skldflks jdfk js;TstSETLS LVLLELVLELVLELV

Sunday, September 11, 2016

gotta film all ova Again...

first of all,isn't today suppozed to be serious???!

Anyways yesterday i was making a video on Taking apart the gopro fake,and i was pretty satisfied. It seemed to be going really well. I took a few pictures at the beginning with it,and also got the video decent quality,and that was that. I upload top the computer,that goes fast,then i view it.TOTALLY out of frame. I got pissed off.now I'm at church,but when I get home I'm gonna film it again.

Also, later on spoon or later(wait wut ) imma get a video update on the quad. So expect that. I gotta go somewhere,  so Uh, yeah, see y'all later 

Levels arisen Arlene styren lobe Siebel stroller slams suede aybe aybe Steve leve leafy 

Saturday, September 10, 2016

I've got a virus... ish... and update on the camera.

Hey guys I'm back! yay... energetic weekend... yeah, well anyways, lets get into it. A while ago I downloaded something called Pencil2D. It's a program you use to make basic animations. When I downloaded it, it came bundled with a bunch of junk you had to take. you can say you don't want it, but it downloads anyways. So it downloaded, and something called MySafeSavings was also downloaded. It's pretty much a virus that hacks you computer and takes all your passwords and eats your computer up. And chews in the cables. And causes shortouts. Ha just kidding. It pretty much is a stupid program you can't close, even with task manager and command prompt, and can't delete either. It kinda pissed me off, and right now, I WILL FIND THE MAN WHO MADE IT AND SLAP HIM TILL HIS HAND IS PURPLE..... yeah...... But what it does is it  keeps opening up Internet Explorer with a "REPORT PHISHING WEBSITE AHEAD!! CALL US SO WE CAN INSTALL A VIRUS AND TAKE CONTROL OF YOUR COMPUTER" and"THIS GAME IS 18++,BUT WE WANT YOU TO PLAY IT ANYWAYS SO WE CAN FILL IT UP WITH ADS AND MAKE MONEY AND AT THE SAME TIME HACK YOU!!!"

Stuff like that. I can't uninstall it, and if you close it it'll open back up again on it's own within 10 seconds. It's frickin STUPID.... Hint 4 life: if you're gonna download something, always read the agreement and the separate pages to make sure they're not trying to download something onto your computer, especially if it is one of those download sites. You can usually trust the site where the software was made, AKA the company site, but don't trust pirated sources and stuff like that.

NOW FOR THE CAMERA... OK so the camera was crap, we know that but after that when I requested the refund THEY GAVE ME THE REFUND AND DIDN'T NEED ME TO SEND IT BACK!!! So I get to keep a crappy  camera and take it apart and junk the rest!!!! yeah.... keep the battery for RC stuff. BTW, I bought the quadcopter, and the extra stuff. it was only 37 bucks, for the quad,  more props (propellers) and other junk. When I get the refund it's technically only 16 bucks... yeah.... awesome... ya know what I'mm do a what's inside a crappy gopro clone video maybe...

wall das it fo today... GAUDDDDD THAT WAS LONG< AND I USED TONS OF ALL CAPS< BUT W HAT EVER, SEE Y'ALL IN dem  nect one...


KEH JRFLSDKJHFLKJSDH WEUIRH FSDI 95USDKLF/CFG WEBRLTBERSTEVE.....OKBYEWAT ARE YOUDOINGGOLEAVENOW,LIKE NOW.....

Wednesday, September 7, 2016

It's a clone! Of a clone!!!

Sup peeps, I'm back...

Anyways ya know yesterday when I talked about the gopro knockoff I got? I tried it out. It's horrible. think of it like this. There's the GoPro. There's a clone of the gopro. This is a clone of the clone. The actual clone is around 100 bucks. This is a clone of the clone. The original clone I expect is probably pretty decent. Actual 1080p. What I got claims to shoot higher than that. The original clone can also shoot higher than that. But this clone uses a different lens, but the same software. Think of it like tellin' a kid they can fly. They can't, but you keep telling them. They obviously can't but you're able to convince them they can, so they jump off a cliff. Then they die. Not great. The camera can't shoot 1080. But they keep downloading the software of the original clone. This software tells the camera it can shoot 1080. But it can't. So you get a  big ugly mess. I decided to return mine. I requested a refund and I'm still waiting. how do I know dis? I'm smart.....:)

Listen. The site it was sold on is great. great deals. sometimes they don't know what they're selling. These people posted this on the site, and the site couldn't catch it. This one is a fake. but there are many others that cost a tad more but are the real deal. Some would cost 100 or so, but there are so many knockoffs that there is always one on sale around 20 bucks. If you have 50 bucks, you can get a 4k wifi enabled gopro knockoff. Even better.... if it's a fake, it's still alright, right? But those aren't knockoffs. those are the real deal... I know they are.

Hey if you're really uncertain, buy the Firefly 6S it's 130 bucks on amazon, but it's a legit fake. Wow, a "legit fake". It's exactly a gopro, it just says firefly 6S instead of gopro on the packaging and on the camera. It'll work with gopro accessories too...


Wow, das a long talk.... well if  you like horribly long lectures sub to da channel, it'll be great... hahaha... wow, ok whatever just bye then...


see y'all in dme next one...
slkdjfskldjf sdkjfk

Tuesday, September 6, 2016

so cheap...

Hey guys, blogging again.. dunno why not, but anyways I 've been waiting a while for something and it finally arrived. I bought this gopro knockoff. Oh wait I already told you. IT WAS 20 BUCKS!!! worth it? I dunno yet. It's charging and I'm gonna transfer the stuff on a micro sd so I can use it...

Wall das about it. If you wanna get the junk I got you can find it here. But don't check out the link just yet. When you go on, you get a "IF YOU BUY NOW UNLOCK A LOWER PRICE" so I would recomend waiting for me to give some footage or so... yeah just wait for it. But here's the link https://www.wish.com/c/555ab62661d31a0e7ac464bd

I recommend you check out the site you can get a bunch of cheap $%^& there........

is that not allowed? the @#$%^ i dunno..... what ever


but anyways if you liked dis blog, sub to da channel, which I haven't done in a while... but yeah, maybe a review of it there? maybe? yeah.. IO dunno

but das it fo today, and uh yeah, see ya'll in dem next one...

Gaud I gotta do homework...


srlth sdkjhflsdkjhflsdkjfhgldfkjgldfkjhgSDYLRKDJGKLXDF GKJELJSDTYSETSTSLETLELTLETLTELETLETETLLCLLVEELFL

Sunday, September 4, 2016

It is done...

First of all, holy ^&*( I have spent more than 100 bucks in the last 2 weeks. I'm a crazy idiot... But it's all gonna be worth it. (Plus I still gotta spend a bunch more). I'm gonna wait till Christmas to get it all cheaper. Or my parents will buy it. Or pay for half of it. Or it'll be discounted...I dunno. I gotta spend another 50 bucks or so...

Lemme tell ya what I got: 50 bucks or FPV goggles, 40 bucks on an FPV camera, 20 bucks for a gopro knockoff, 20 bucks on batteries for the FPV goggles, and uh, oh that's it as of now. I'm gonna spend 27 bucks on a quad, Imma spend 22 bucks on more batteries for it and some sd cards... There's 150 bucks. I have 20 bucks of cash at home, plus a hundred dollar bill, and a bunch of cash in my bank account...

BTW I'm not gonna fly just the quad. That's STUPID. I plane (punny) to print out a frame to mount the parts onto. Then I'll fly on that where I can add my camera. Not the fake go pro. The fpv one...

In case you don't know, FPV is stuff like this:


Thanks Charpu for that clip. JK I'm just using,. it for reasons. FPV is first person view, where you fly a quadcopter or a heli or a plane and you attach a camera to it that transmits to goggles or a screen.

Ok that's the money part. Now the title. Remember the last post about the AK47? It's done. For now. right now it's all white and boring, but I plan to eventually paint it. Right now it's hanging right above my 3d printer held by 3 thumbtacks shoved into the wall...

Oh I can't find the pic with it hanging but this one looks cooler...So yeah dat's done... it took pretty much that entire roll of filament...what else?. That'll be on myminifactory too BTW.  Here is the model (not mine) if you want to print it. my pic will be there though: https://www.myminifactory.com/object/rust-game-gun-17484




so yeah, das it fo today's blog. wait, why is it all centered?
.
.
.
.
.
.
.
.
.
.
.
.
.
. Oh dere we go back to normal. anyways das it fo today, and uh, yah, see y'all in dem next one....



peeeeeessssssss


setkjskldjfskld jflsdjflsdjflsdkjflsdkjf